Thursday, August 26, 2010

Fabric Covered & Padded Letters - A Tutorial


Materials:



• 8" Paper Mache Letters
• Quilt Batting
• 1/4 Yard Of Fabric Per Letter (you will have some nice scraps leftover)
• Fabritac - amazing fabric glue! Works like a charm, but heed the bottle warning - it'll dry fast. And you'll get carded at Joann's for buying this. I just think it's comical that you'd be carded for anything at Joann's.
• Disappearing Ink Fabric Marker
• Flexible Tape Measurer
• Q-tips; yes Q-tips. I'll explain below.
• If you want to hang the letters, you’ll also need scrap yarn & scrap felt & more Fabritac.


Steps:


1. If your fabric is wrinkly, iron it! You don't want crinkles on your pretty letter - if you ignore the wrinkles, you'll see them later on display and it'll drive you crazy. (Or, maybe that is just me!)




2. Trace letters for Batting. You can put the letter right side up for this step. I use a sharpie for this step and marked right onto the batting.


If you are making lots of them, do it all at once!

 3. Cut Batting Letters. Cut just INSIDE the line because you want the batting to fit on top of the letter and not overlap it.


 4. Glue Batting onto Letter. Get our the Fabritac and start gluing the batting onto the front of the paper mache letters. If the batting overlaps the sides of the letter, you will want to trim that down.




5. Trace letters for Fabric. For both, place the fabric wrong side up - so you'll be marking on the wrong side with your marker. Use the disappearing fabric marker for this step!


          For the front of your letter, turn the quilted side down so that it's touching the wrong side of the fabric. Trace the letter.

          For the back of your letter, turn the quilted side UP. Trace the letter.

(For symmetrical letters like "a" it does not matter, but I've messed up an "L" before and it came out backwards.)




6. Cut Letter Fabric. Cut approximately 1/2" around the letter tracing. The extra fabric is how you wrap the letter; these little “flaps” will actually be glued down all around the side of the letter.


7. “Notch” the Letter Fabric. That extra 1/2" you cut ... now you want to make little cut notches from that exterior JUST TO but not touching the tracing of your letter. This is how the fabric will curve and lay flat to the shape of your letter. For the straight parts, you can notch every 1-2", for the curves and corners, notch every inch or as needed.

See the little slits all around the sides? Those are the notches / flaps.

 8. Glue Fabric onto Letter. Get out the Fabritac again. Lay the letter on top of the wrong side of the back fabric, and start applying glue onto the sides of the paper mache letter and wrapping the “notched tabs” onto the letter. The glue works fast, so work in small sections. Glue it all down and then repeat for the front fabric. Q-tips? They are helpful to get into the creases and the insides of the letters (ex: inside the cut out of the "a").

These little flaps are the notches I am talking about .. they do 2 things: keep you from having to put glue on the front or back fabric which will show (because you glue the SIDES) and make it easy to wrap the letters with the fabric.


 9. The Outside Lining. Make your "circumference" cover … this is a long strip of fabric that covers the sides of the letters and makes it look very nice and neat! Doing this is (as I understand it) sort of like making bias tape.

Measure. Use the flexible tape measure to find out the "circumference" of the letter exteriors... and the inserts. For example, I measured the outside of the "a" as 31 inches - in include wiggle room and overlapping, and the inside of the "a" as 6" (again that includes a little extra length). In the "a" example, you  need to cut a strip of fabric that is 2" wide and 31" long as well as a strip that is 2" wide and 6" long.



Iron. Now that you've cut the pieces, you'll use the iron and lots of steam to make it look like bias tape. The width of the strip is 2" and your letter is 1" deep, so we are going to tuck in the edges 1/2" each, so the finished width is 1" = the depth of the letter. Make sense?Finally, fold one end over, so when it's exposed, the raw edges will be covered up and tidy. (:


Hopefully this picture clarifies what I am talking about ... these are 2 strips: one for the outside of the "a" and one for the inside. They were 2" wide, but I ironed the long ends in by 1/2", so that the finished width is 1".
 10. Wrap the Exterior. Start with the "raw" end of the long exterior strip and glue it down. Start gluing and pulling the exterior strip taut all the way around the letter. Once at the end, glue down that folded over end and hold until it sticks. Don't forget the inside of the letters with “holes”: A, B, D, etc. Overlap the ends in the most inconspicuous area.


11. PS: I will not lie. Wrapping the inside of an "a" is not fun, at all.


12. Instructions for Hanging on a Wall. These letters sit nicely on a shelf, but when I made them for my girls, I wanted them to hang. SO, this is how I did it. The picture will help this make sense: take about 5” of scrap yarn; tie it into a knot so there is a loop; trim the ends. Then, flip the finished letter over and on the top of the back, glue it down. Cut a square of felt and glue it over the top for added “security!” For letters like “u” you will need to make two loops so the letter hangs straight. TIP: When hanging, they might not be perfectly straight – I used double stick tape on the bottom of the letters and stuck it to the wall to help the letters hang better.



Close up of the loop - envision this picture rotated left 90 degrees ... the loop obviously goes UP!
________________________________________________________
Have fun! Any questions? Leave me a comment with your email address!
_______________________________________________________________



14 comments:

  1. Great tutorial! Very clear instructions and I love that there are tons of photos. Well done, Challenge Queen Sara.

    ReplyDelete
  2. Clear and Concise Sara...thanks!-Julie

    ReplyDelete
  3. Very nice... thanks for sharing.

    ReplyDelete
  4. Thank you for sharing :) Glad I found this as I nearly spent £40 on some for just one of my girls today so am going to get creative and same myself some money in the process :) very happy!!

    ReplyDelete
  5. Followed this post step by step. I was really impressed with the end result my letters looked very professional and my daughter in law to be was very pleased!

    ReplyDelete
  6. Thanks for breaking it down step by step! I made some letters and was so pleased with how they turned out.

    ReplyDelete
  7. Dairy products have saturated fats lean meats
    are allowed in Paleo Solution Wiki Diet. Here are some tips for how
    to maintain a lifestyle of that day but free from the common
    chronic diseases we see so often today. Inspiration is
    what will provide your body with fat? It's hard not to wonder about how fast-food and processed foods have been introduced. Certain foods and food groups are completely restricted while following the paleo solution wiki diet does not involve calorie counting or following a time restrictive meal program.

    My webpage; paleo recipes blog

    ReplyDelete
  8. Hey there! I could have sworn I've been to this website before but after browsing through some of the post I realized it's new to me.

    Anyhow, I'm definitely happy I found it and I'll be book-marking and checking back frequently!


    Look into my webpage - vakantiewoningen frankrijk huren

    ReplyDelete
  9. I'll right away snatch your rss as I can not to find your email subscription hyperlink or e-newsletter service. Do you have any? Kindly permit me recognise in order that I may subscribe. Thanks.

    Here is my blog post :: vakantiehuizen frankrijk

    ReplyDelete
  10. I seriously love your site.. Pleasant colors &
    theme. Did you make this website yourself? Please reply back as I'm planning to create my own personal site and would like to know where you got this from or just what the theme is named. Kudos!

    Here is my web site: luxe vakantieparken frankrijk

    ReplyDelete
  11. My partner and I stumbled over here different web address and
    thought I might check things out. I like what
    I see so i am just following you. Look forward to looking
    over your web page yet again.

    my page - vakantiehuis frankrijk ()

    ReplyDelete
  12. Hi to all, the contents present at this website are genuinely awesome for people knowledge, well, keep up the
    nice work fellows.

    My page :: huis huren frankrijk []

    ReplyDelete
  13. I read this post completely regarding the resemblance of newest and previous technologies, it's amazing article.

    My web page luxe vakantiehuis

    ReplyDelete
  14. It's really an informative and well described post. I appreciate your topic for blogging. Thanks for sharing such a useful post.

    ReplyDelete